Punta de prueba llana ultrasónica 50kHz del modo de sueño IP67 resistente a la corrosión

Sleep Mode Ultrasound Level Probe Various Working Modes​

Adjusting the switching points and the analog output.

Switching output and analog output type sensor can be programmed according to user needs.

There are eight types of output functions can be programmed.

All teaching procedures are as follows,

In step 1 the relevant teaching conditions (or high-level voltage GND) teaching point. Step 2 selected from different (and different from step1) and different points of teaching conditions (with different step1). Routine must be completed during a blue LED flashes, otherwise the default value will be valid.

The ultrasonic sensor features a switch output with two teachable switching points. These are set by applying the supply voltage - UB or + UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. Switching point A1 is taught with - UB, A2 with +UB. Five different output functions can be set.

1, a single switching point, a gap having a hysteresis function normally open.

2, a single switching point having a hysteresis function normally closed gap.

3. The object presence detection - normally open function.

4. The presence of the detection object off opening function.

Switching point, Setting distance only after power on. The internal clock can assure can't be

Product features

    High sensitivity
    Small size
    IP67 protection level
    Corrosion-resistant shell, suitable for corrosive media and applications

Sensor Commands

Each command has a total of 6(or 8)bytes, and all sensor commands are sent and displays by HEX. The sensor ID Tag uses 01 as an example

Ambient conditions

Mechanical specifications